HHW-8 Automatic Water Replenishment Water Bath

I. HHW-8 Automatic Water Replenishment Water Bath Introduction:

The digital display constant temperature water bath is widely used for drying, concentration, distillation of chemical reagents, pharmaceuticals, and biological products. It can also be used for water bath constant temperature heating and other temperature experiments. It is a common equipment in biochemical laboratories for biology, genetics, environmental protection, medicine, health, and educational research. Its main features: ① The working tank is made of stainless steel material with * corrosion resistance; ② Microcomputer control, LED display, automatic temperature control; ③ Automatic water replenishment function.

II. HHW-8 Automatic Water Replenishment Water Bath Basic Parameters:

Model

HHW-8

Display Method

Digital Display Automatic Temperature Control

Temperature Control Range

Room Temperature ~ 100°C

Error Range

±1°C

Temperature Fluctuation

±0.5°C

Power

1.5KW

Working Chamber Size

600*300*130mm

Power Supply

220V 50Hz


III. Automatic Water Replenishment Water Bath Usage and Maintenance:

1. Safe Electricity Use: This product uses 220V AC power. The power socket should be a three-hole safety socket and must be properly grounded. Never connect the ground wire to a gas cylinder.

2. Before powering on, fill the bath with water above the partition. During use, the heating tube must never be exposed above the water surface, otherwise, the heating tube may burn out, crack, or cause solder to melt, leading to water leakage, electric shock, etc.

3. Do not leave the device unattended for long periods during heating to avoid the risk of dry burning due to water shortage.

If the automatic water replenishment function is needed, place the silicone tube in a pure water bucket. When the water level drops to the low water mark, the pump will automatically start to add water,

and stop when it reaches the high water mark.